Now that it’s officially Autumn, it’s important to make sure your fuel tank is in good condition so you don’t go cold this winter.

Check Oil Levels

Letting your tank run empty or even run low can be damaging. It can result in sludge at the bottom of your tank being disturbed when the tank is then refilled. This can cause filters to be blocked which can result in performance issues.

ENSURE YOUR TANK IS SECURE

Prior to any bad weather, we advise positioning your tank securely and checking your base is adequate. The above photo is an example of an unsecured base that has caused the tank to “bow” in the middle from the unsupported weight of the oil.

As your oil levels decrease, your tank can be more susceptible to moving from its base during adverse weather conditions. Your heating oil tank should be situated at the centre of its base ensuring it complies with the OFTEC regulations.

PREVENT WATER CONTAMINATION

It’s recommended to visually inspect your tank for any signs of damage or cracks where water could enter your tank, also ensuring lids are closed tightly. It is also good practice to check your tank before any forecast of heavy rainfall or snow.

If water does manage to enter your tank it can cause bacteria growth and aid the formation of sludge. This can cause problems with blocked fuel lines and filters where you would require an engineer to clear it.

CHECK FOR CONDENSATION

Condensation can occur in your tank from hot weather during summer. This can then drip into your fuel causing water contamination. Unfortunately, you cannot check for water contamination during a visual inspection. This would require someone to come out and dip your tank to check for water and then remove it from the fuel. Find out more on our water removal/tank health check here.

REGULAR TANK INSPECTIONS

it’s a good idea to check your tank on a monthly basis. Just like servicing a car your tank can become unsafe between services. Our drivers will always carry out a visual inspection before a delivery which you can do too. Some things to check for:

• Cracks- Check for any small or large cracks in the Body of your tank.

• Discolouration - if the tank is turning white or fading due to sun exposure it may be time to replace your tank

• Bulges- check for any bowing where the tank is bulging.

• Smell - If you are able to smell kerosene strongly you may have a tank leak.

• Stains - If there are any stains or wet patches around your tank this would suggest a leak.

• Corrosion- Check all pipework for any rust or damage.

If you would like to book a tank health check or for more information visit here. To discuss any of the points made in this blog, contact our team on 01360 6660264 and one of our friendly staff will assist you.